OZ-4 peeler for potatoes and vegetables

OZ-4 peeler for potatoes and vegetables

The OZ-4 peeler for potatoes and vegetables consists of the following units:
• aluminum hull with a tank 7,
• the plate 2 with bearing 5 and power unit,
• replaceable segments lined with abrasive mass 3,
• a three-phase electric motor 4.

Drawing. OZ-4 peeler for potatoes and vegetables: a) view, b) diagram.

The plate is fixed on the shaft in a way that allows its easy assembly. The peeler shaft is mounted in a slide bearing fixed in a bearing bush 5. The drive from the electric motor is transmitted via a V-belt 7 on the pulley 8, peelers mounted on a roller. The method of mounting the motor allows you to adjust the belt tension with the knob 9 next to the electric switch 10, starting and stopping the peeler. The spin direction should be clockwise. There is an injector stub in the cover 6, to which the rubber hose is attached, water supply. The OZ-4 machine is placed on a stand with a height of approx. 0,4 m. The engine power is 250 W, water consumption - 5 l/min, single load - 4-6 kg, performance - 50-80 kg/h, and the time of cleaning one charge - 1-2 minutes.

The peeler should be placed near a three-phase socket 220/380 V, a tap with running water and a drain with a minimum diameter 50 mm. It should also be earthed or neutralized.